Zanussi ZDK320 Notice D'utilisation page 13

Examples of cooking applications
Heat
setting:
1
2
3
4
5
Care and cleaning
Clean the appliance after each use.
Always use cookware with clean bottom.
Warning! Before any maintenance or cleaning can
be carried out, you must disconnect the hob from
the electricity supply.
The hob is best cleaned while it is still warm, as
spillage can be removed more easily than if it is left
to cool.
Warning! Sharp objects and abrasive cleaning
agents will damage the appliance.
For your safety, do not clean the appliance with steam
blasters or high-pressure cleaners.
Scratches or dark stains on the glass ceramic have
no effect on how the appliance operates.
What to do if...
Problem
The appliance does not operate.
The cooking zone does not heat up.
The effectiveness of the hob is not
satisfactory.
Use to:
Keeping warm
Gentle simmering
Simmering
Frying / browning
Bringing to the boil
• Examine the fuse in the electrical system of the house in the fuse box. If
the fuses blow time after time, speak to an authorised electrician.
• Make sure that the appliance is plugged in and the electrical supply is
switched on.
• Make sure that you turn the correct control knob.
• Examine the fuse in the electrical system of the house in the fuse box. If
the fuses blow time after time, speak to an authorised electrician.
• Make sure that the hob is clean and dry.
• Make sure that the cookware is the correct size for the cooking zone.
• Make sure that the cookware has a flat bottom.
• Make sure that the heat setting is correct for this type of cooking.
Heat
setting:
6 Bringing to the boil / quick frying / deep-
Information on acrylamides
Important! According to the newest scientific knowledge, if
you brown food (specially the one which contains starch),
acrylamides can pose a health risk. Thus, we recommend
that you cook at the lowest temperatures and do not brown
food too much.
To remove the dirt:
1. – Remove immediately:melted plastic, plastic foil,
and food with sugar. If not, the dirt can cause
damage to the appliance. Use a special scraper for
the glass . Put the scraper on the glass surface at
an acute angle and move the blade on the surface .
– Remove after the appliance is sufficiently
cool:limescale rings , water rings, fat stains, shiny
metallic discolorations. Use a special cleaning
agent for glass ceramic or stainless steel.
2. Clean the appliance with a moist cloth and some de-
tergent.
3. At the end rub the appliance dry with a clean cloth.
Possible cause and remedy
Use to:
frying
13