Toro TimeMaster 30in Manuel De L'opérateur page 6

2
Installing the Blade-control
Bar
No Parts Required
Procedure
Install the blade-control bar into the upper handle (Figure 5).
Figure 5
3
Filling the Engine with Oil
No Parts Required
Procedure
Important: Your machine does not come with oil in
the engine. Before starting the engine, fill the engine
with oil.
Max. fill: 20 oz (0.59 l), type: SAE 30 detergent oil with an
API service classification of SF, SG, SH, SJ, SL, or higher.
Note: When the crankcase is empty, pour about 3/4 of
the crankcase capacity of oil in the crankcase, then do the
following:
1. Move the machine to a level surface.
2. Remove the dipstick by rotating the cap
counterclockwise and pulling it out (Figure 6).
3. Wipe the dipstick clean with a clean cloth.
4. Insert the dipstick fully into the oil-fill tube, then
remove the dipstick.
5. Read the oil level on the dipstick (Figure 6).
6
G017514
Figure 6