Toro TimeMaster 30in Manuel De L'opérateur page 11

•
Recoil-start Handle:
1. Turn the ignition key to the Run position
(Figure 17).
2. Pull the recoil handle slowly to the rear until you
feel resistance, then pull sharply. Allow the rope to
return to the engine slowly.
Using the Self-propel Drive
To operate the self-propel drive, simply walk with your hands
on the upper handle and your elbows at your sides, and the
machine will automatically keep pace with you (Figure 18).
Note: You can self-propel the machine with the blades
engaged or disengaged.
Note: Use the traction-assist handle in situations when you
need more control than you have with the self-propel drive
alone.
G017516
Figure 17
G017595
Figure 18
Stopping the Engine
Standard Model
Press the toggle switch (Figure 19) to the Stop position and
hold it until the engine stops.
1. Toggle switch
Electric-start Model
1. Turn the key to the Off position (Figure 20).
2. When the engine stops, remove the ignition key and
take it with you when you leave the machine.
Engaging the Blade
When you start your engine, the blade does not turn. You
must engage the blade to mow.
1. Pull the blade-control-bar lock back to the blade-control
bar (Figure 21).
11
G017636
Figure 19
G017517
Figure 20