Publicité
Les langues disponibles
Les langues disponibles
1. Warning—read the Operator's Manual for information on charging the battery; contains lead; do not discard.
2. Read the Operator's Manual.
Setup
Important: Remove and discard the protective plastic
sheet that covers the engine.
1
Assembling the Handle
No Parts Required
Procedure
WARNING
Assembling and unfolding the handle improperly
can damage the cables, causing an unsafe operating
condition.
• Do not damage the cables when unfolding the
handle.
• If a cable is damaged, contact an Authorized
Service Dealer.
1. Rotate the upper handle so that it nests together with
the lower handle (Figure 3), and tighten both knobs on
the handle to lock the upper handle in place (Figure 4).
104-7953
Electric-start model only
1
1. Upper handle
1. Handle-lock lever
2. Release the handle-lock lever (Figure 4).
3. Pull the handle rearward and lock it into position
(Figure 4).
5
2
G016547
Figure 3
2. Knob (2)
1
G016551
Figure 4
Publicité
