Toshiba SL-3329 Mode D'emploi page 7

Fast Forward and Fast Reverse
1. To switch to fast forward mode, press the FF button @ lf
the end of the disc is reached in this mode, the player is stopped
in stop mode.
. To switch to fast reverse mode, press the FR button @® . If
the beginning of the disc is reached, the player will be in stop
mode.
The volume of the playback sound is reduced during fast for-
ward and reverse modes.
In the pause mode, the pickup is fed forward and reverse at a
speed 4 times that of fast forward and fast reverse during play,
with no playback sound generated.
In the REPEAT mode fast forward and fast reverse work only
for the current track.
To Store Memory
With this program play function, you can arrange the tracks on the
disc in any order as you wish. The memory covers 16 tracks at most.
*
Program memory procedure ;
The program memory can be stored when the player is in the stop
mode.
1.
2
3.
*
Press the PROGRAM button ® _and the CD player is switched
to program mode (PROGRAM display is flashing).
Press the UP @ or DOWN button @ to display the desired
track number.
Press the PROGRAM button @) once again. Program-1 (P-1)
is stored in the memory.
Press the UP @) or DOWN button @ again to select the next
track.
Press the PROGRAM button @) again to store the next track
in program-2 (P-2).
Store up to 16 tracks in memory by using the same procedure.
When 16 tracks are stored in the memory up to program-16
(P-16) and another track is further stored, only the new track is
stored from program-1 (P-1).
After inputting programs, press the PLAY/PAUSE button @ .
The player plays in the order of the input program.
To check program contents
Press the PROGRAM button 34) . First, the display shows the
track number of program-1 (P-1) stored in that memory.
Press the PROGRAM button @) again. The display shows the
next program
Addition of program
{f less than 16 programes are stored, any program may be added in
the program mode.
*
ARS
oi
or
Correction of specified program
Press the PROGRAM button ® to select the desired program
number,
Press the UP @) or DOWN @ key to select the desired track.
Press the PROGRAM button ) . The desired track becomes
effective.
Deletion of specified program
. Press the PROGRAM button @) to select the desired program
number.
. Press the STOP button @ to clear the track.
Press the STOP button ® as often as number of programs
stored in and after P-1. All program numbers are cleared and
the program mode is released.
To clear program memory contents
Memory contents are also cleared when the OPEN/CLOSE
button is pressed to open the tray in the STOP-mode, when
the FUNCTION selector (24) is turned to any position other than
"CD", or when power is switched off.
When program play is released, the player is held stopped and
the display shows "0".
To Start Program Play
Store tracks into program memory as described in the program
memory store procedure.
*% To Start Program Play.
1. Press the PLAY/PAUSE button @) while PROGRAM indicator
@® is flashing. Disc play automatically start from program-1.
2. When the player plays to the end of the final program, it stops
automatically and it is switched to the program mode starts.
= To Move a Specific Track (Program Play}
* To locate the beginning of a track
1. To skip to the beginning of a following track:
Press the UP button §) . Play will be interrupted and the
player will skip to the beginning of the next program track
and resume playing. The player will skip forward one track
every time you press the UP button @ .
@ While the final program is played in the REPEAT mode
or in a normal playback, the UP button @ never works if
pressed.
@ 'f the UP button @ is pressed while the final program is played
in the REPEAT] ALLJ mode, program-1 (P-1) follows.
2. To skip to the beginning of the current or a previous track:
Press the DOWN button ® . Play will be interrupted and the
player will return the beginning of the track that was every
time when You press the DOWN button @ .
* Fast Forward and Fast Reverse
1. To change to fast forward mode, press the FF button @ .
@ The fast forward mode works on only the current track.
2. To change to fast reverse mode, press FR button ® ;
@® The fast reverse mode works on only the current track.
@ The volume of the playback sound is reduced during fast forward
and reverse mode.
@ In the pause mode, the pickup is fed forward and reverse at a
speed 4 times that of fast forward and fast reverse during play,
with no playback sound generated.
Recording
= Recording from the tuner:
1. Press the POWER switch @ to turn on the power.
2, Press the deck B STOP/EJECT button ® , insert a cassette
tape and close the door.
3. Press the deck 8B PAUSE button @ first, and next the REC
button @.
4. Follow steps 2-4 to ''To fisten to the radio''
5. To begin actual recording, release the deck B PAUSE button @.
6. Press the deck B STOP/EJECT button @® , if you want to stop
recording.
7. Turn off the power by pressing the POWER switch @ again.
= Recording from a phonograph record:
1. Press the POWER switch @ to turn on the power,
2. Press the deck B STOP/EJECT button @_. insert a cassette
tape and close the door.
3. Press the deck B PAUSE button @ first, and next the REC
button ®.
4. Follow steps 2-8 to ''To listen to a record"
5. Before begin record play from the desired point, release the
PAUSE button @.
6. Press the deck B STOP/EJECT button ® _ if you want to
stop recording.
7. Turn off the power by pressing the POWER switch 8 again.
= To dub cassettes
(Use deck A for playback and deck B for recording.)
1.
2.
3.
Press the POWER switch @ to turn on the power.
Set the FUNCTION selector @ to TAPE",
Press both deck A and B STOP/EJECT buttons @ , @) and
insert the original cassette in deck A and the blank cassette in
deck B. Close the doors.