Publicité
Les langues disponibles
Les langues disponibles
1/ DESCRIPTION OF YOUR WINE CABINET
A
B
C
D
E
F
G
H
I
A
Cabinet body
B
Setting and control panel
C
Breather hole + Active charcoal filter
D
Storage shelf
E
Door catch
F
Sliding shelf
G
Cabinet bracing bar
-
(do not remove)
large model only
H
Fresh air vent
I
2 adjustable feet for levelling
J
Lower hinge (x2)
6
GB
Q
P
O
N
M
L
K
J
K
Grill
L
Condensate collection tray with outlet hole
M
Product identification label
N
Dual-action lock
O
Door (including a handle built into the side
of the door)
P
Removable lighting system (4 LED, adhesive base)
Q
Upper hinge
2/ POWER SUPPLY
The wine cabinet's power lead has a plug, to be plugged into a standard earthed outlet to prevent
any risk of electric shock.
Contact your usual EuroCave retailer to change the power lead if it is damaged. It must be replaced
by a EuroCave original manufacturer's part.
3/ PROTECTING THE ENVIRONMENT - ECODESIGN
Spare parts for our appliances are available for 11 years.
For further
information, contact your EuroCave stockist. For France, contact our
customer service department. Contact details at www.eurocave.com
Disposal of packaging
All packaging used by EuroCave is made from recyclable
materials (except the expanded polystyrene
high density base and the lower hinge protector).
After unpacking your cabinet, take the packaging to
a refuse collection point. For the most part, it will be
recycled.
Recycling: a caring gesture
Electrical and electronic equipment can have a harmful effect on the
environment and human health owing to the presence of hazardous
substances.
You should never therefore trash electronic and electrical equipment with
unsorted municipal waste.
4/ INSTALLING YOUR WINE CABINET
Unpacking
When your cabinet is delivered, check the outside for signs of damage
•
(impact, warping...).
Open the door and check that the various elements inside are intact
•
(walls, Main du Sommelier supports, hinges, bottle support...).
Remove the protective elements found inside and outside your cabinet
•
including the lower hinge protector (see diagram (1))
Fit the cap (see diagram 2), found in the accessories bag, used for sealing
•
the hole in the lower hinge.
1
2
Have the power supply socket checked by a qualified electrician who will check that it is
correctly earthed and will carry out, if necessary, work to ensure that the socket
complies with current standards.
If you are moving to a foreign country, check that the supply characteristics of the cabinet
correspond to the country (voltage, frequency).
When purchasing a new EuroCave product, you can entrust recycling of
your old appliance to your EuroCave retailer.
Speak to your EuroCave retailer.
He will explain the removal and
collection arrangements set up in the EuroCave network.
In compliance with legislation relating to protecting and caring for the
environment, your wine cabinet does not contain C.F.C.s or H.C.F.Cs.
To save energy
• Install your wine cabinet in a suitable location (see following page) and
observe the recommended temperature ranges.
• Keep the door open for as short a time as possible.
• Ensure that the door seal is in good working order and that it is not
damaged. If it is, contact your EuroCave retailer.
- We recommend that you fill your wine cabinet to at least 75% of its
total capacity.
Disable any unusable appliances by unplugging them and cutting off the
power lead.
Protective wedges for transportation have been attached to each shelf. 2
•
wedges per shelf (Picture 1). Remove all of them using a rotating movement
(Picture 2). You can retain these wedges and reuse them if you have to
transport your wine cabinet over a long distance.
Picture 1
Picture 2
7
GB
Publicité
