Publicité
Les langues disponibles
Les langues disponibles
Saw blade tilt (to the left)
Mitre angle
Maximum workpiece dimensions*
Width
− Height saw blade vertical
− at 45° mitre
− at 45° saw blade tilt
− at 45° / 45° compound mitre
Depth
− saw blade vertical
− saw blade vertical
− at 45° saw blade tilt
− at 45° / 45° compound mitre
* The workpiece dimensions stated here are maximum dimensions. Depending on the relation between height and width of the
workpiece, the possible dimensions may be less.
** The values stated are emission values and as such do not necessarily constitute values which are safe for the workplace.
Although there is a correlation between emission levels and environmental impact levels, whether further precautions are neces-
sary cannot be derived from this. Factors influencing the actually present environmental impact level in the workplace include the
characteristics of the work area and other noise sources, i.e. the number of machines and other neighbouring work processes.
Also, permissible workplace values may vary from country to country. This information is intended to assist the user in his estimate
of hazards and risks.
14.1 Available Saw Blades
Description
TCT 250 x 2.8 / 1.8 x 30 34 W
TCT 250 x 2.8 / 1.8 x 30 42 W
TCT 250 x 2.8 / 1.8 x 30 80 W
TCT 250 x 2.8 / 2.0 x 30 80 TF
mm
mm
mm
mm
mm
mm
mm
mm
No. of teeth
34 alternate bevel teeth
42 alternate bevel teeth
80 alternate bevel teeth
80 trapezoidal-flat teeth
ENGLISH
90° ... 45°
90° ... 45°
Crosscut and
Circular saw
mitre saw
+45° ... –45°
60
60
46
46
210
not limited
154
210
not limited
154
Stock no.
091 003 0990
091 003 1015
091 003 1031
091 003 1040
n.a.
81
n.a.
54
n.a.
n.a.
n.a.
29
Publicité
