Franke Smart FSM 45 MW XS Manuel De L'utilisateur page 9

4. PAUSE
For pausing an active function, for example to stir or
turn the food, simply open the door�
To start it up again, close the door and press
It is also possible to temporarily pause cooking by
pressing � To resume the cooking process, close
the door and press
AUTOMATIC PAUSE
(STIR OR TURN THE FOOD)
Certain functions will pause to allow you to turn or
stir the food�
When the oven pauses the cooking and "Turn food"
or "Stir Food" appear on the display, open the door
to turn or stir the food, then close the door and press
to start cooking again�
Please note: after 2 minutes, even if the food has not been
turned or stirred, the function will start again automatically.
5. END OF COOKING
An audible signal will sound and "End" will appear
on the display to indicate that a cooking function is
complete�
For some functions, it is possible to delay cooking
while maintaining previously established settings:
turn the adjustment knob to set a new cooking time,
then press �
�
. TIMER
When the oven is switched off, the display can be
used as a timer� The timer does not activate any of the
� cooking cycles�
To activate the function and set the cooking time you
require, turn the adjustment knob�
Press to activate the timer� An audible signal will
sound and the display will indicate once the timer has
finished counting down the selected time� To make a
change to the timer once it has been activated, turn
the adjustment knob, then press
To interrupt it or return to the current time display,
turn the adjustment knob until 0:00 is on the display
and press �
Please note: Once the timer has been activated, you can
activate a function as well: The timer will continue to count
down the selected time automatically without having any
effect on the function. To go back to viewing the timer,
wait for the function to finish or stop the oven function by
pressing .
EN
to confirm�
9