Güde GV 1431 2in1 Traduction Du Mode D'emploi D'origine page 27

Defects searching
Defect
The motor does not start
Unsteady running,
strong vibrations
Motor cuts out
Poor work performance Blade is blunt
Cause
Missing power supply
Broken cable
Defective supply
Main switch or safety arch is not
controlled
On/Off switch defective
Blade is damaged
Roller loose
Blocks by foreign bodies
Working height not set
Lawn too high
Removal
Check the cable, connect it to the
power supply and if necessary replace it
or have it repaired by an expert.
Check the cable, connect it to the
power supply and if necessary replace it
or have it repaired by an expert.
Electric cable is too long or its cross
section is too small
See „Operation" below
Have it replaced in a Güde authorised
service centre
Replace the blade
Check and tighten roller mounting
Locking release
Have the blade sharpened or replaced
Set working height
6
Mow lawn first
ENGLISH
23
7