Publicité
Les langues disponibles
Les langues disponibles
Safety *
The assembly must be installed, maintained
and repaired exclusively by persons familiar
with the instructions.
Always disconnect power source
(electricity, air or hydraulic) from the
equipment when it is not being used.
This equipment generates high pressure.
Extreme caution should be used when
operating this equipment as material leaks
from loose or ruptured components can
inject fluid through the skin and into the
body. If any fluid appears to penetrate the
skin, seek attention from a doctor
immediately. Do not treat injury as a simple
cut. Tell attending doctor exactly what type
of fluid was injected.
Any other use not in accordance with
instructions will result in loss of claim for
warranty or liability.
• Do not misuse, over-pressurize, modify
parts, use incompatible chemicals, fluids,
or use worn and/or damaged parts.
• Always read and follow the manufacturer's
recommendations regarding fluid
compatibility, and the use of protective
clothing and equipment.
• Failure to comply may result in personal
injury and/or damage to equipment.
NOTE
If equipment has an identification plate,
date code is shown as CW/YR meaning,
Calender Week/Year on Identification
plate.
As shown in this example,
manufacturing date 33/21 means
product was manufactured in the thirty-
third week of year 2021.
MODEL
SERIES
82230
33/2021
DATE CODE
ASSEMBLED
IN U.S.A.
An SKF Group Brand
Explanation of signal
words for safety
NOTE
Emphasizes useful hints and
recommendations as well as
information to prevent property damage
and ensure efficient trouble free
operation.
CAUTION
Indicates a dangerous situation that can
lead to light personal injury if
precautionary measures are ignored.
WARNING
Indicates a dangerous situation that
could lead to death or serious injury if
precautionary measures are ignored.
DANGER
Indicates a dangerous situation that will
lead to death or serious injury if
precautionary measures are ignored.
WARNING
Do not operate equipment
without reading and fully
understanding safety
warnings and instructions.
Failure to follow warnings and
instructions may result in serious injury.
B
Week
WARNING
Year
Do not attempt to repair or disassemble
while system is pressurized.
Never point dispensing valve at any
part of body or at another person.
Always follow fluid manufacturer's
recommendations regarding
compatibility and use of equipment.
Cap may be under pressure. Open
slowly and point away from people.
Failure to comply may result in death
or serious personal injury.
Do not operate equipment without
wearing personal protective gear.
equipment such as dust mask, non skid
safety shoes, hard hat, or hearing
protection used for appropriate
conditions will reduce personal injuries.
personal injury.
clean any fluid on floor before continuing
operation.
or serious personal injury.
Do not use this equipment to supply,
transport, or store hazardous
substances and mixtures in accordance
with annex I part 2-5 of the CLP
regulation (EG 1272/2008) or HCS 29
CFR 1910.1200 marked with GHS01,
GHS06 and GHS08 hazard pictograms
shown:
*
5
CAUTION
Wear eye protection. Protective
Failure to comply may result in light
WARNING
Do not allow fluid to leak
onto floor when operating
equipment. If spill occurs,
Failure to comply may result in death
WARNING
Indicates change.
Publicité
