Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
12
Specified Conditions Of Use
The device serves exclusively for removing uncont-
rolled growth between flagstones, on paved areas,
on masonry, in garden beds as well as in lawns
during the growing period.
The device can also be used for lighting barbecue
charcoal in outdoor barbecues.
Please observe the notes on use and regulations of
the barbecue manufacturer for this.
The device is suitable for soldering copper pipes, gal-
vanizing bodywork parts, welding plastics, thawing
out water pipes or heating metal parts
You can find special nozzle attachments in our range.
This device is intended for domestic use only.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
Emergency procedure
Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. If you seek help, state the
following pieces of information: 1. Accident site, 2.
Accident type, 3. Number of injured persons, 4. Injury
type(s)
Symbols
WARNING / Caution!
WARNING! Danger of burns
Read the operating instructions to reduce
the risk of injury.
Wear eye protective goggles !
Wear ear protectors!
Wear gloves!
Unplug the machine before any work
on it.
Keep dry at all times.
Never expose tool to rain.
Do not use the device in rooms
with a potentially explosive
atmosphere. Do not use the
device in rooms in which easily flammable material or
gases may be present. Do not point the hot air flow at
people.
Class II tool.
CE marking
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
Mains Connection
Operation is only allowed with a safety
switch against stray current (RCD max. stray
current of 30mA).
Connect only to single-phase AC system voltage as
indicated on the rating plate. It is also possible to
connect to sockets without an earthing contact as
the design conforms to safety class II.
Only plug-in when machine is switched off.
Maintenance
Unplug the machine before any work on it.
Repairs and works specified in these Instructions may
only be performed by qualified authorised staff.
Use only original accessories and original spare parts.
Keep the device, in particular the air vents, clean at all
times. Never spray water on the device body!
Do not clean the plastics with solvents, flammable or
toxic fluids. For cleaning, use a damp cloth only.
Caution! If the power cord of the appliance gets
damaged, it must be replaced by the manufacturer or
its customer service or a similarly qualified person to
avoid danger.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insufficient mainte-
nance and care can lead to unforeseen accidents and
injuries.
If necessary, a list of spare parts can be found at www.
guede.com.
Publicité
