Publicité
N
000664
000642
503022
EMU01497
PROCEDURE FOR TILLER CONTROL
MODEL
4) Place the gear-shift lever in the neutral
position.
NOTE:
The start-in-gear protection device prevents
the engine from starting except when in Neu-
tral.
5) Attach the engine stop switch lanyard to
a secure place on your clothing, or your
arm or leg. Then, install the lock plate on
the other end of the lanyard in the
engine stop switch.
w
8 Attach the engine stop switch lanyard
to a secure place on your clothing, your
arm or leg while operating.
8 Do not attach the lanyard to clothing
that could tear loose. Do not route the
lanyard where it could become entan-
gled, preventing it from functioning.
8 Avoid accidentally pulling the lanyard
during
normal
engine power means the loss of most
steering control. Also, without engine
power, the boat could slow rapidly. This
could cause people and objects in the
boat to be thrown forward.
6) Place the throttle control grip in the
"START" position.
3-12
GB
operation.
Loss
of
Publicité
Chapitres
