Zummo Z14 Nature Manuel D'utilisation page 36

2 If the Front Cover is not assembled or is improperly assembled, the display will show an
Error message with the Front Cover and Hopper symbols flashing.
3 If the tray is not assembled or is not in place, the machine will not operate, and the display
will show an Error message by displaying a flashing dark tray.
4 If one of the containers/chutes is incorrectly positioned, the machine will not work and the
display panel will show Error. The corresponding bin/chute will appear shaded
intermittently.
5 If for any reason the machine gets blocked during operation, after a few seconds the motor
will stop automatically and the display will show an Error message with a faulty flashing
icon, until the cause of the blockage is removed.
6 Thanks to a thermal protection system in the motor, in the event of overheating the machine
will stop and the display will show an Error message and a thermometer icon. In this case,
please wait approximately 10 minutes to allow the motor temperature to decrease. The error
message will disappear. Please check that the ventilation gratings are not obstructed.
7 If there is no message on the display, it means there is no power supply. Check that the
power switch is on and that the plug fuse is not burnt out (Fig.18).
36 36