Publicité
Les langues disponibles
Les langues disponibles
LED
Indication
indica-
tor
The indicator
flashes.
2
The indicator is
on.
All 4 indicators
3
flash.
Indicator no. 2
2 and
and the first
3
LED on indica-
tor no. 3 flash.
Indicator no. 2
2 and
flashes and in-
4
dicator no. 4 is
on.
Transportation and storage
•
Secure the product during transportation to prevent
damage and accidents.
•
Remove the cutting blade before transportation or
storage of the product.
•
Keep the product in a locked area to prevent access
for children or persons that are not approved.
•
Keep the cutting blades in dry, frost free conditions.
•
Disconnect the battery from the product.
•
Examine all new and used blades for transport and
storage damage before assembly.
Disposal of the battery, battery charger
and product
The symbol below means that the product is not
domestic waste. Recycle it at a recycling station
for electrical and electronic equipment. This helps to
prevent damage to the environment and to persons.
Speak to local authorities, domestic waste service or
your dealer for more information.
30
Cause
There is a battery error.
Temporary error
The power trigger and the On/Off
button are pushed at the same
time.
Servicing is necessary.
The product does a Firmware
Over-the-Air (FOTA) update.
Servicing necessary.
The battery level is low.
Temperature deviation.
Transportation, storage and disposal
Solution
Pull the power trigger 1 time to reset the error warn-
ing. If the error warning comes back, do a test with a
different battery.
Pull the power trigger 1 time to reset the error warn-
ing. If the problem does not disappear, speak to an
approved Husqvarna service center.
Release the power trigger and start the product.
Speak to an approved Husqvarna service center.
Let the FOTA update finish.
Speak to an approved Husqvarna service center.
Charge the battery.
The product is too hot or too cold.
Note:
The symbol shows on the product or package of
the product.
1960 - 002 - 25.08.2023
Publicité
