Publicité
Les langues disponibles
Les langues disponibles
Minimum flame adjustment
– Remove the knobs (push-on type).
– Light the burners and adjust the minimum flame by turning the adjustment screw clockwise to decrease the flame
and anticlockwise to increase it (fig. 6-7). The screwdriver for adjustment is supplied with the accessories.
Highest minimum
Lowest
minimum
adjustment
Technical Data
Technical data
Appliance category:
BURNERS
RATED
POWER (kW)
Auxiliary
1.00
Semi-rapid
1.75
Rapid
3.00
Triple crown
3.80
TOTAL INSTALLED GAS RATED POWER (kW)
TOTAL RATED CAPACITY - GAS G20 (m³/h)
TOTAL RATED CAPACITY - GAS G30/G31 (g/h)
POWER / VOLTAGE / CURRENT / FREQUENCY
AIR NECESSARY FOR COMBUSTION (2 m³/h per kW of installed gas rated power)
The use of larger pots than those specified can cause excessive overheating of the knobs and top and, in case
of prolonged use, yellowing of the cover (if in stainless steel).
Franke declines any liability for damage due to such use.
Total heat capacity: see dataplate on the bottom of the hob.
Air necessary for combustion: 2 m
Power supply voltage 220/240 V 50-60 Hz.
The appliance complies with the following EC Directives:
– 90/396/EEC (Gas);
– 2006/95/EEC (Low Voltage);
– 2004/108 ECC (Electromagnetic Compatibility).
12
adjustment
fig. 6
II 2H3+ (G20=20 mbar >> G30/G31=28-30/37 mbar)
REDUCED
RATED
POWER
CAPACITY G20
(kW)
(m³/h)
0.65
0.095
0.70
0.167
1.30
0.286
2.10
0.362
3
/h per kW of installed power - see dataplate.
FHM 905 4G LTC
G20
RATED
INJECTORS
CAPACITY
20 mbar
G30/G31
(100/mm)
(g/h)
72
73
97
127
115
218
133
277
0.6 W / 220-240 V / 16 A / 50-60 Hz
fig. 7
INJECTORS
MAX
G30/G31
RECOMMENDED
28-30/37 mbar
POT Ø (mm)
(100/mm)
50
140
65
220
85
240
97
260
11.30
1.077
822
22.60
Publicité
