Publicité
Les langues disponibles
Les langues disponibles
Screw Driving
a) Install a suitable bit.
NOTICE: Always use the correct
type and size of screwdriver bit for
your application.
b) Grasping only the handle of the
tool, align the bit perpendicular
to the screw.
c) Apply just enough pressure to
keep the bit engaged on the
screw.
d) To tighten a screw, set the direction of rotation at "Forward", then
depress the trigger switch.
e) To loosen a screw, set the direction of rotation at "Reverse", then
depress the trigger switch.
NOTICE: The screwdriver may also be used manually as a non-
powered screwdriver when battery power has been depleted.
WARNING
the screwdriver at a right angle to the fastener to avoid
damaging the fastener head .
24
Do not over-tighten, as the force of the
screwdriver can break the fastener . Keep
Fig. 7
Publicité
