Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
Ext probe
Call
Service
For the intervention of technical personnel, it is necessary to call the Assistance service.
12.3.12
Alarm: "Int Probe fault"
The equipment is equipped with temperature probes that measure the air temperatures. In case of too low
temperatures, No-frost alarm reports in "HOME" the message "Alarm!" "Lock!" and in the "Alarms" page the note
"Wait 1 hour". Pressing the [] key will display:
Int probe
Call
Service
Call Customer service to request assistance from technical personnel.
12.3.13
Alarm: "Exh Probe fault"
The equipment is equipped with an Exhaust temperature probe that measures the air temperature extracted from
the outside . The Probe Fault reports in "HOME" the message "Alarm!" "Lock!" and in the "Alarms" page the note
"Exh probe Call Service". Pressing the [] key will display:
Exh probe
Call
Service
12.3.14
Alarm: "Pipe"
This alarm indicates that the water in the tray has reached the threshold level and the drain hose may be blocked.
The Probe Fault reports in "HOME" the message "Alarm!" and in the "Alarms" page the note: "Pipe unlock
check". Pressing the key [] key will display:
Pipe
Unlock?
Check
Finally, after checking the drain pipe, to reset the alarm, select the [YES] key and press the [] key again. If the
alarm reappears after resetting, it is necessary to call the Service.
56
ALARM
ALARM
ALARM
ALARM
NO
[ ▲ ]
9 9
[
NO
[ ▲ ]
9 9
[
]
NO
[ ▲ ]
9 9
[
]
NO
[ ▲ ]
YES
9 9
[
]
NO
YES
9
9
]
[
]
]
NO
YES
9
9
[
]
]
NO
YES
9
9
[
]
]
NO
9
9
[
]
]
Publicité
