Gima ECG90A Manuel D'utilisation page 27

【Operating instructions】
1. Enter "Filter Setting" interface as Fig.7-3.
Selected state
(1) You can select AC, EMG or DFT. In two frequency selections of AC or EMG, you can only
select one.
(2) Click
(3) Click
2. Click this icon to check the state of SD card, as Fig.7-4.
Click or press confirm key to exit this interface.
3. Click this icon or the menu key to enter the main menu, as Fig.7-5.
4. Click this icon or press "UP" and "DOWN" key on the panel to switch speed.
or [Confirm] key on the panel to save the current settings.
or [Confirm] key on the panel to exit without save.
Fig. 7-3
Fig. 7-4
Fig. 7-5
21