Monogram ZIR301NPNII Instructions D'installation page 22

Installation Instructions - Dual Integrated Installation
STEP 5 JOINING DUAL INSTALLED UNITS
BOTTOM BACK UNIFICATION
Loosen the two bottom screws of rear access covers of
both units and remove the top screws.
Hang the unification bracket to the bottom screws and
reassemble the screws at the top
Tighten screws to tie units together.
BOTTOM FRONT UNIFICATION
Install the bottom front unification bracket using a 3/8"
driver (4 screws).
TOP UNIFICATION
Bracket
22
Loosen the front two screws on top of the unit and
remove the two middle screws.
Assemble the bracket to the front screws and reinstall
the middle screws.
Tighten screws to tie units together.
Bracket
Front of appliances
31-1000600 Rev. 1