AYA ART130ETU Manuel D'utilisation page 39

5. REVERSE DOOR
1. Remove the two screws. (6) securing the top. Remove the top (7).
2. Remove the 2 screws holding the top hinge (5) on the body.
3. Remove the top hinge (5).
4. Lift and remove the refrigerator door. Store it on an area without
the risk of damage.
5. Remove the 2 screws (8) holding the bottom hinge (2). Remove
the bottom hinge (2).
6. Unscrew the left foot (4) and screw it on the right side.
7. Then position the lower hinge (2) on the opposite side and attach
it with 2 screws (8).
8. Reset the rod (8) on the bottom hinge (2).
9. Position the refrigerator door on the bottom hinge.
10. Then position the top hinge (5) in the refrigerator door, place the
-37-