Publicité
Les langues disponibles
Les langues disponibles
Model: Triumph Daytona T 955i
Important: If you are not a trained motorcycle mechanic stop
now. Ask a local motorcycle shop to do the work for you.
Please read the LSL-Superbike-Kit Fitting instructions.
Length of brake-lines:
in front of the fork
behind the fork
Fix the ignition lock with new screws M6x25 and the short bushes
Ø15x11 mm. Mount the top yoke with original nut. First tighten the
Take the clutch cable out of its original fixing at the cooler unit and
lead the clutch cable under the frame tube on the right side and
For mounting the hydraulic reservoir use the new delivered 25°-
bracket. The bracket has to been fixed with the upper brake cylinder
Use the two 2mm thick aluminium spots to reduce the steering angle
To give length to the electrical cables you have to take off the inner
———————————————————
Rev.00 02/03/2015
Fitting instruction Superbike-Kit
Part no.: 120T025
Proposed bar:
Code for cable routing:
Throttle cable:
Clutch cable:
Choke cable:
Fairing and the fairing screen need no operation.
central nut and then the clamping of the fork legs.
through the frame triangle on the left side.
screw and the washer Ø6mm as spacer.
as it is necessary for the higher handlebar.
covers and open the fixing of the cables.
The original mirrors stay at the fairing.
Zubehör von
Type: 535
A01 / E01 / L01
Position of cable from riders position
right from steering head
F
left from steering head
B
F
/ L
B
/ L
-
/ -
Instructions:
Year: ´02-03
68 cm
R
L
Das Original
—
——
Seite 1 von 2
Publicité
