Ferroli PREXTHERM RSH 100N Instructions D'utilisation, D'installation Et De Montage page 39

PREXTHERM RSH N
6. CONTROL PANEL (OPTIONAL)
6.1 EBM (Effi cient Boiler Management) control panel
C16015150 – EBM (Efficient Boiler Management) control panel
Leyenda
1 Panel power switch 2SB1
2 Panel power lamp 2HL1 (GREEN)
3 Burner ON switch 2SB2
4 Maximum safety temperature alarm lamp 2HL2 (RED)
5 Safety thermostat 2TSI – Reset button
6 DHW selection
7 Select mode of operation
The EBM control panel is not supplied as standard equipment with the boiler. It provides the following features:
- Operating language selection
- Selection of the mode of operation: heating, economical operation, timer and vacation.
- Control of the boiler pump
- Control of the anti-condensation bypass pump
- Control of the single-stage burner
- Control of the two-stage burner
- Modulating burner control
- Hour meter for the burner stages
- Display of the boiler settings
- Display of the alarms produced
- Climate feature (with optional external probe).
This can control a system with a maximum configuration of:
- A high-temperature area with pump control
- One or two low-temperature areas with a mixer valve and pump
- A DHW storage tank, pump controlled by tank temperature
Other applications:
Can be used to connect up to 16 boilers in cascade, in a master-slave system. Can be integrated into a solar system.
N.B. All the instructions for installation and setting the parameters of the EBM control panel are contained in the manual supplied
with the kit.
A73020821
fi g.14
8 Information
9 Test soot removal feature STB
10 Manual control
11 Confirm data entry
12 Correct room comfort set point – Navigation
and settings
13 Cancel setting
14 Service connector (BSB)
EN 39