Télécharger Imprimer la page

Ferroli PREXTHERM RSH 100N Instructions D'utilisation, D'installation Et De Montage page 32

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 44
The boilers feature two 1/2" fittings for bulb sheaths (able to house 3 bulbs each). The pre-wired control panel is located above the boiler,
and allows for automatic operation.
4.2 Operating principle
PREXTHERM RSH N boilers are fitted with a closed cylindrical furnace, in which the flame produced by the burner is reversed peripherally
toward the front. From there, the burned gas enters the fire tubes. At the outlet, the gas is collected in the smokebox, and is then sent to the
chimney. The combustion chamber is always pressurized during burner operation. For the pressure values, see Table 1, in the column Flue
gas side pressure drop. The flue and flue stack fitting must be made in accordance with current standards and legislation, using rigid pipes
that are resistant to high temperatures, condensate, and mechanical stress, and are airtight.
32
EN
L1
fig.1 - 100N÷420N
L1
fig.2 - 500N÷800N
PREXTHERM RSH N
A73020821

Publicité

loading