DENTAURUM SUS2 Mode D'emploi page 15

Fig. 2 SUS in situ.
2
6,0 mm
Spring span
6,0 mm
Spring span
2,1 mm
2,1 mm
Fig. 3 Setting the required length or force of the SUS
above as a spring, below as a hinge (Herbst effect).
3. Application of the SUS
The SUS
inner spring set at maximum activation (spring path
6.0 mm, force with full compression approx. 2.4 N). This
takes into consideration the most common indication
of the appliance, i.e. used in the same way as the
Jasper-Jumper
without laboratory fabricated retention. The effect is
comparable to a total of 24 hours of headgear therapy
with Class II elastics – mainly a dentoalveolar effect (Fig. 3).
The SUS
be deactivated
max. ˆ = 2,4 N
(REF 607-144-00) by turning the hexagon socket
screw of the telescope element as far as it will go, in a
Front stop
max. ˆ = 2,4 N
counter-clockwise direction (Fig. 3). This converts the
flexible SUS
2.1 mm, buffer force with full compression approx. 1.0 N).
Back stop
0 mm ˆ = 1,0 N
0 mm ˆ = 1,0 N
,
2
2
as a spring: The SUS
2
with existing
TM
as a hinge: The inner spring can
2
using the
spring into a rigid SUS
2
EN
is supplied with the
2
bands / brackets and
hexagon socket key
hinge. (Spring path
2
15