Télécharger Imprimer la page

Sony VPL-CX11 Mode D'emploi page 27

Publicité

Les langues disponibles

Les langues disponibles

The PICTURE CTRL
Menu
The PICTURE CTRL (control) menu is used
for adjusting the picture.
Items that cannot be adjusted depending on
the input signal are not displayed in the
menu.
For details on the unadjustable items, see
page 42.
When the video signal is input
PICTURE CTRL
CONTRAST:
8 0
BRIGHT:
5 0
5 0
COLOR:
HUE:
5 0
SHARP:
5 0
D. PICTURE:
OFF
COLOR TEMP:
LOW
COLOR SYS:
AUTO
When the RGB signal is input
PICTURE CTRL
CONTRAST:
8 0
BRIGHT:
5 0
GAMMA MODE: GRAPHICS
COLOR TEMP:
HIGH
Menu Items
CONTRAST
Adjusts the picture contrast. The higher the
setting, the greater the contrast. The lower
the setting, the lower the contrast.
BRIGHT
Adjusts the picture brightness. The higher
the setting, the brighter the picture. The
lower the setting, the darker the picture.
VIDEO
INPUT-A
COLOR
Adjusts color intensity. The higher the
setting, the greater the intensity. The lower
the setting, the lower the intensity.
HUE
Adjusts color tones. The higher the setting,
the picture becomes greenish. The lower the
setting, the picture becomes purplish.
SHARP
Adjusts the picture sharpness. The higher the
setting, the sharper the picture. The lower
the setting, the softer the picture.
D. (Dynamic) PICTURE
Emphasizes the black color.
ON: Emphasizes the black color to produce
a bolder "dynamic" picture.
OFF: Reproduces the dark portions of the
picture accurately, in accordance with
the source signal.
GAMMA MODE
Selects a gamma correction curve.
GRAPHICS: Improves the reproduction of
halftones. Photos can be reproduced in
natural tones.
TEXT: Contrasts black and white. Suitable
for images that contain lots of text.
COLOR TEMP
Adjusts the color temperature.
HIGH: Makes the white color bluish.
LOW: Makes the white color reddish.
COLOR SYS (System)
Selects the color system of the input signal.
• AUTO: NTSC
, PAL, SECAM and
3.58
NTSC
(switched automatically)
4.43
• PAL-M/N: PAL-M/PAL-N and NTSC
(switched automatically)
Normally, set to AUTO. If the picture is
distorted or colorless, select the color system
according to the input signal.
The PICTURE CTRL Menu
3.58
27
GB

Publicité

loading