Sony VPL-CX11 Mode D'emploi page 23

5
Turn the zoom ring to adjust the size of the picture.
6
Turn the focus ring to adjust the focus.
Caution
Looking into the lens when projecting may cause injury to your eyes.
To adjust the volume
Press VOLUME +/– keys. The volume can be adjusted for each of INPUT A,
VIDEO and S VIDEO input.
To cutoff the picture
Press the MUTING PIC key on the Remote Commander.
To restore the picture, press the MUTING PIC key again.
To control the computer using the supplied Remote Commander
When you connect an IBM PC/AT compatible to the projector, you can control
the mouse of the computer using the Remote Commander.
The R/L CLICK keys and joystick function as follows.
Key and joystick
R CLICK (front)
L CLICK (rear)
Joystick
Note
Make sure that nothing obstructs the infrared beam between the Remote Commander
and the remote control detector on the projector.
To get the clearest picture
You can adjust picture quality when projecting a signal from the computer.
1
Project a still picture from the computer.
2
Press the APA key.
"Complete!" appears on the screen when the picture is adjusted properly
Notes
• Press the APA key when the full image is displayed on the screen. If there are black
edges around the image, the APA function will not function properly and the image
may extend beyond the screen.
• When you switch the input signal or re-connect a computer, press the APA key again
to adjust the picture again.
• You can cancel the adjustment by pressing the APA key again while "ADJUSTING"
appears on the screen.
• The picture may not be adjusted properly depending on the kinds of input signals.
• Adjust the items in the INPUT SETTING menu when you adjust the picture manually.
Function
Right button
Left button
Corresponds with the movements of the mouse
.
23 GB
Projecting