Sony VPL-CX11 Mode D'emploi page 13

Remote Commander
The keys that have the same names as those
on the control panel function identically.
You can control a connected computer using
the Remote Commander.
For details, see "To control the computer
using the supplied Remote Commander" on
page 23.
MUTING
+
PIC
VOLUME
–
INPUT
MENU
+
RESET
–
(D ZOOM)
D ZOOM
1
FUNCTION
1 I / 1 1 1 1 key
2 APA (Auto Pixel Alignment) key
3 ENTER key
4 Joystick
Functions as the mouse of the computer
connected to the unit.
5 Arrow ( / / /
M m <
I / 1
APA
ENTER
R
CLICK
2
8
) keys
,
6 R CLICK key
Functions as the right button on a mouse.
7 FUNCTION 1, 2 keys
These keys function when the supplied
application software is used.
When you connect the projector with a
computer, you can open a file on the
screen by just pressing the FUNCTION
key. This will enhance your
presentation. To use this function,
allocate a file to the FUNCTION key by
using the application software.
For details, see the README file and
the HELP file supplied with the
application software.
8 CONTROL S OUT jack (stereo
minijack)
Connects to the CONTROL S IN jack on
the projector with the connecting cable
(not supplied) when using the Remote
Commander as a wired one. In this case,
you do not need to install the batteries as
the power is supplied via the CONTROL
S IN jack on the projector.
9 RESET (D ZOOM) key
Resets the value of an item back to its
factory preset value or returns the
enlarged image back to its original size.
0 D ZOOM +/– key
Enlarges the image at a desired location
on the screen.
+: Pressing the + key once highlights
one of the images divided into 16.
Use an arrow key (M/m/</,) to
move the highlight portion to the
point in the image to be enlarged.
Press the + key repeatedly until the
image is enlarged to your
requirements.
–: Pressing the – key reduces an image
that has been enlarged with the D
ZOOM + key.
qa L CLICK key
Functions as the left button on a mouse.
qs MENU key
qd INPUT key
Location and Function of Controls
13 GB