qd Security lock
qd
qd qd
Connects to an optional security cable
(Kensington's).
The security lock corresponds to
Kensington's MicroSaver
System.
If you require further information,
contact
Kensington
2855 Campus Drive
San Mateo, CA 94403
In North America
Phone: 800-235-6708
Fax: 800-247-1317
Outside North America
Phone: 847-541-9500
Home page address:
http://www.kensington.com/
qf Ventillation holes (intake,
qf qf
qf
bottom)
qg Lamp cover (bottom)
qg
qg qg
qh RELEASE (adjuster adjustment)
qh
qh qh
button
For details, see "How to use the
adjuster" on page 10.
qj Carrying handle
qj qj
qj
Pull up the handle from the projector for
carrying.
qk Ventilation holes (intake, rear)
qk qk
qk
GB
10
Location and Function of Controls
How to use the adjuster
To adjust the height
Adjust the height of the projector as follows:
®
Security
1
2
Notes
• Do not remove the adjusters from the
projector. Do not use the projector with the
adjusters removed.
• Be careful not to let the projector down on
your fingers.
• Do not push hard on the top of the projector
with the adjusters out.
Lift the projector and press the
RELEASE button.
The adjuster will extend from the
projector.
RELEASE button
While pressing the button, lower the
projector. Then, release the button.
For fine adjustment, turn the adjusters to
the right and the left.
to lower the
projector
to raise the
projector