Turning Off; Residual Heat Display; Overheating Protection; Working With The Cast Roaster Pan - Gaggenau VR 414 610 Notice D'utilisation

Turning off

Turn the control knobs to the 0 position.
9
WARNING
Risk of burns
When the appliance cover is closed, this leads to
a build-up of heat. Only operate or switch on the
appliance when the appliance cover is open. Do
not use the appliance cover for keeping warm or
setting down. Only close the appliance cover
once the appliance has cooled down.
9
CAUTION
Damage to the appliance
Remove spilled liquids before opening the
appliance cover.

Residual heat display

The illuminated rings behind the control knobs flash
after turning off as long as the appliance is too hot to
safely touch it.

Overheating protection

In the event of overheating, the appliance automatically
turns off the grill heating elements in order to protect
the countertop and cabinets. After the appliance has
sufficiently cooled down, turn it back on.

Working with the cast roaster pan

The cast roaster pan is especially suitable for preparing
chopped or liquid foods, vegetables, egg dishes and
desserts.
The cast roaster pan is placed on the rear grill heating
element after removing the wire rack. You can prepare
other grilled food on the front wire rack at the same
time.
You can obtain further case roaster pans from your
specialist dealer as special accessories (large or small).
Note: Leave the lava stone trough with the lava stones in
the grill while working with the cast roaster pan.
How to grill with the cast roaster pan
1 Remove the rear wire rack.
2 Carefully place the cast roaster pan on the rear grill
heating element.
3 Turn the control knob for the rear grill heating
element to level 12. Pre-heat the grill until the
heating-up signal goes off.
4 Lightly coat the cast roaster pan with oil and place
the food on it that you wish to grill.
11