EUROM PD2100XXL Mode D'emploi page 17

ASSEMBLY
 Remove all the packaging material and check that all the parts are present.
Ensure that definitely no packaging material has remained around the 'head' of
the radiator (lamp, cap and switches). Ensure there is a clear work space and
keep flammable materials out of the area.
 Check the device, the electrical cable and the plug for damage. Do not connect
the device to the mains if you notice any damage!
 Do not connect the terrace radiator to the mains before it is fully assembled!
 To assemble the terrace radiator, you will need a few wrenches that fit. Follow
the instructions below step by step. If you have any
doubts about anything, you should consult your dealer.
Step 1: Attach the soil stand (with the base attachment) to
the base using three M6x10 bolts.
Step 3: Thread the electrical cable with the socket through
the base and the soil stand and pull around 2 metres of
cable through it. The ordinary 220-240V plug thereby
remains on the underside of the base behind, and you
should lead the socket through the stand.
Step 4: The top stand is located in the middle stand. Bring the
electrical cable through the middle and top stand and screw the middle
stand to the soil stand. The black ring with the coupling nut is located
beneath the middle stand.
Step 5: Loosen the black coupling nut a little.
You can now pull the top stand from the middle
stand. Pull it around 25 cm out and firmly screw
the coupling nut back in place. The socket must
continue to come out from the top stand.
Step 2: Place the decorative cap over the soil stand.
17