Publicité
Les langues disponibles
Les langues disponibles
Factory Defaults
Binding
ON
Bind socket
Insert the Bind Plug in the
Connect a fully charged battery
Power on the ESC. The Status
EXT RX & BIND Socket on
pack to the ESC.
LED will double flash repeatedly,
the ESC.
indicating the ESC is in bind mode.
Center the ST TRIM dial on
Power the transmitter on.
The ESC Status LED will stop
the transmitter.
flashing and remain solidly lit.
OFF
Bind socket
Remove the Bind Plug, then power off the ESC to save the settings.
Power off the transmitter.
www.modellmarkt24.ch
WWW.ARRMA-RC.COM
22
Publicité
