Publicité
Les langues disponibles
Les langues disponibles
2-in-1 ESC and Receiver Unit
Fan socket
CH3 socket
Power
Switch
(CH1) socket
Wire Holder
Clip
ESC Specifications
Input Voltage
Battery Modes
If using LiPo batteries you must set the correct battery mode on the ESC
(electronic speed controller) to prevent battery damage.
*Factory Default
Battery Mode
Cut-off Voltage
www.modellmarkt24.ch
WARNING: When using LiPo batteries, always ensure the ESC is set to the correct
battery mode. Failing to do so may damage to the battery. Charging or using a damaged
battery could result in fire.
External
Receiver /
Motor Connectors
Bind socket
Steering
Setting 'Jumper'
6-7 NiMh (7.2-8.4v) / 2S LiPo (7.4v)
Low Voltage Cut Off
CAUTION: Heat sink may be hot after use.
Antenna
NiMH
5v
19
Heat-sink
Battery Plug
BEC Output
LiPo
6.6v
WWW.ARRMA-RC.COM
5.0v/3A Max
Publicité
