TEFAL T-fal ClipsoMinut' Guide De L'utilisateur page 11

1
To switch on the cook control: press the button.
2
Program the cooking time (in minutes).
If you made a mistake with the cooking time, wait for
4 seconds until the flame symbol does not flash any
more, then hold the button down to reset.
3
Start with the heat source at maximum power.
4
As soon as your pressure cooker has reached the
cooking temperature, the cook control rings and the
countdown begins (numbers flash).
Reduce the power of the heat source.
If you wish, you can now remove the cook control from
the pressure cooker and take it with you. The time will
continue to count down.
5
At the end of the cooking time, the cook control rings.
To stop the cook control ringing, press the button.
Turn off the heat source.
Fitting and removing the cook control*
To fit the cook control (F)
part into the module and then press to clip the rear
part.
To remove the cook control (F), lift it using the tab and
remove it.
- Fig. 12, first insert the front
2
1
2 2