Troubleshooting - Skil SD561802 Guide D'utilisation

TROUBLESHOOTING

Problem
Tool does not work.
Bit cannot be installed.
1. Battery is depleted.
2. Tool is over-loaded.
3. Battery is over-temperature.
4. Burned out switch.
1. Something is stuck in the
bit holder.
2. Bit does not fit the holder.
FOR RECYCLING
To preserve natural resources, please recycle or dispose of batteries
properly. This product contains lithium-ion batteries. Local, state, or federal
laws may prohibit disposal of lithium-ion batteries in ordinary trash. Consult
your local waste authority for information regarding available recycling and/
or disposal options.
Cause Remedy
1. Charge the battery.
2. Release the trigger switch
and try again.
3. Turn off the tool and allow
the tool to cool.
4. Have the switch replaced
by an Authorized SKIL
Service Center or Service
Station.
1. Clean the bit holder.
2. Use suitable bit or adapter.
17