Publicité
Les langues disponibles
Les langues disponibles
4. Scope of delivery
• Operating manual
• Saw blade
• Saw blade guard
• Parallel stop
• Stop rail for parallel stop
• Transverse stop
• Stop rail for transverse stop
• Clamping handle for transverse stop
• Push stick
• Hose clamp for extraction hose
• Machine stand part 1
• Machine stand part 2
• Machine stand part 3
• Machine stand part 4
• Machine stand part 5
• Machine stand part 6
• Ring spanner 10 / 13 mm
• Ring spanner 10 / 21 mm
Assembly material
A. Coach bolt M8 x 78 mm (8x)
B. Allen screw M6 x 53 mm (4x)
C. Phillips screw M5 x 50 mm (2x)
D. Phillips screw M5 x 40 mm (4x)
E. Coach bolt M6 x 55 mm (2x)
F. Phillips screw M5 x 10 mm (1x)
G. Knurled nut (2x)
H. Small washer (2x)
I. Large washer (4x)
J. Spacer (8x)
K. Nut M8 (8x)
L. Nut M6 (4x)
M. Nut M5 (7x)
N. Flat end cap (6x)
O. Round end cap (2x)
P. Wheel screw (2x)
5. Proper use
The circular table saw is used for the longitudinal and
transverse cutting (only with the transverse stop) of
all types of timbers and plastic, in accordance with
the machine size. It is not permitted to cut any type
of round timber.
Only suitable saw blades (HM or CV saw blades) may
be used for the machine. The use of HSS saw blades
and any type of cutting wheels is prohibited.
Notes:
Compliance with the regulations, safety instructions,
descriptions and notes in this operating manual are part
of proper use.
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
The safety, operating and maintenance specifications
of the manufacturer, as well as the dimensions specified
in the operating manual, must be observed.
Working on or with the product may only be carried
out as described in this operating manual. All other
maintenance and repair work not described in this
operating manual must be carried out by a customer
service centre.
Please observe that our equipment was not designed
with the intention of use for commercial or industrial
purposes. We assume no guarantee if the equipment
is used in commercial or industrial applications, or for
equivalent work.
Other general occupational health and safety-related
rules and regulations must be observed.
m ATTENTION
When using the product, several safety warnings
must be observed to prevent injuries and damage.
For this reason, carefully read the operating and
safety instructions. Keep them in a safe place so
that the information is available at all times. If the
product is handed over to another person, hand over
the operating and safety instructions with it. We ac-
cept no liability for accidents or damage that occur
due to a failure to observe this operating manual and
the safety instructions.
The liability of the manufacturer and resulting dam-
ages are excluded in the event of modifications of
the machine.
Despite use as intended, specific risk factors cannot
be entirely eliminated. Due to the design and layout
of the machine, the following risks remain:
• Contact with the saw blade in the exposed sawing
area.
• Reaching into the running saw blade (cutting injury)
• Kick-back of workpieces and workpiece parts
• Saw blade breakage
• Ejection of faulty carbide parts of the saw blade
• Hearing damage when the necessary hearing pro-
tection is not used.
• Harmful emissions of wood dusts during use in en-
closed areas.
6. Safety instructions
General power tool safety warnings
m WARNING: Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool.
Failure to follow all instructions listed below may re-
sult in electric shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
GB | 31
Publicité
