Bartscher 150983 Mode D'emploi page 22

•
Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the
device or personal injury, and further, the warranty expires.
•
Do not move or tilt the device when in operation.
•
Never leave the device unattended when in use.
5.2 Installation and connection
•
Unpack the device and remove packing material.
•
Put the device on a secure, level surface capable of supporting its weight when full.
•
Do not put the device in sunny places, as this may have a negative impact on
cooling efficiency.
•
Do not put the device near open flame, electric ovens, heaters or other heat
sources.
•
Never put the device at the edge of a table to avoid accidents.
•
Never put the device in a wet or moist environment.
•
Ensure the device's ventilation ducts are not covered in order to ensure optimum
cooling. Keep the device at an appropriate distance from all objects.
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label).
Connect the device only in case of compliance!
Take note of the security advice!
•
The electrical circuit of the socket must be secured to at least 16A. Only connect
the device to a wall outlet; do not use any extension cords or power strips.
•
Place the device so that the plug is easily accessible so as to quickly disconnect the
device if the need arises.
- 21 -