Use Instructions
The range hood is designed to remove smoke, cooking vapors and odors from the cooktop area. For best results, put the
hood fan before starting cooking and let it run for several minutes after the completion of cooking to evacuate all traces of
odor, steam or smoke.
The controls of the hood are located on the front and center of the body of the hood.
A. Controls of the fan and lights
B. Grease filters
C. Handle for the grease filters
D. Lamp housings (LED)
Controls for the cooktop hood
1.
Power on: After you have connected the cooker hood to the mains supply the backlight will turn on. The
backlight will turn off after 5s without any operation and hood will enter stand-by mode.
2.
Press
button once; lights will be on . Press
3.
Push the low button, the indicating light
motor will stop.
4.
Push the middle button, the indicating light
the motor will stop
D
A
B
C
, and the motor runs at low speed. Push it again and the
, and the motor runs at mid speed. Push it again and
30
button again; lights will be off.