Ancona AN-1280 Instructions D'utilisateur page 15

Step 7 : Attaching the unit under the kitchen cabinets
• Mark or drill a small hole on the mounting position according to the space and dimensions cited on the following drawings.
. • Install the hood under the cabinet using suitable screws to fix in position.
Method 3 : attach the range hood under the kitchen cabinets and ducting to the top round 6" damper and exhaust outdoors.
•
• Method 4: attach the range hood under the kitchen cabinets and ducting to the rear rectangular damper and exhaust outdoors.
The following drawings show the mounting dimensions of the 30" (750mm) width and 36" (900mm) width.
•
Method 3: Attaching under kitchen cabinets using 6" round ducting
Fig # 14
Method 4: Attaching under kitchen cabinets using rectangular ducting.
Fig # 15
Step 8: Installing Filters
•To install filters: (See Figure #16)
• Angle the filter into slots at back of the hood
• Push button on handle of the filter
• Release the handle until the filter fits into a resting position.
• Repeat to install all filters.
INSTALLATION:
Fig # 16
15