Ancona AN-1280 Instructions D'utilisateur page 14

INSTALLATION:
Step 6 : Attaching the unit to the wall
• Mark or drill a small hole on the mounting position according to the dimensions on the following drawings.
• Insert suitable screws into the holes.
• Hang the range hood onto the screws.
• Method 1: attach the ducting to the top round 6" damper and exhaust outdoors.
• Method 2: attach the ducting to the rear rectangular damper and exhaust outdoors.
• The following drawings show the mounting dimensions of the 30" (750mm) width and the 36" (900mm) width.
Method 1: Attaching to the wall using 6" round top ( vertical) venting.
Fig # 12
Method 2: Attaching the unit to the wall using rear rectangular ducting.
Fig # 13
14