Publicité
Les langues disponibles
Les langues disponibles
SAFETY
HAZARDS AND SAFETY PROVISIONS DURING APPLIANCE DECOMMISSIONING
When decommissioning the appliance, watch out for the following hazards and provide for
the countermeasures indicated below:
► Source of hazard: electric power
Hazard
Risk
of
electric
shock caused by
live components
► Source of hazard: handling of heavy loads
Where or in which situations
Hazard
does the hazard occur?
Risk of injury
When the appliance moves
due to body
overload
3269941_GB_rev.1
Where or in which situations
does the hazard occur?
• On the power cable
• Under protective panels
• Under the control panel
• Under protection covers
Countermeasures
• Operations to the electric
system may be carried out
by authorised and qualifi ed
staff only, in accordance
with the relevant applica-
ble laws.
• Specialist procedure
• Turn off the power supply
before removing the covers
• Secure it to prevent acci-
dental switching on
• Ensure that there is no volt-
age
Countermeasures
• Use a suitable lifting de-
vice
• Observe the limit values
for lifting and transport
• Wear personal protective
equipment
ENGLISH
Safety
device
• Protection
panels
• S y s t e m
switch-dis-
connector
Safety device
• Protective gloves
• Protective shoes
• Safety helmet (e.g.
for
suspended
loads,
overhead
operations...)
11
Publicité
