shark RIDILL Manuel D'utilisation page 23

a smaller size.
3. Grasp the back of the helmet at the
base and attempt to pull the helmet
off your head. Next, push the helmet
upwards
guard. You should push and pull with
relatively significant force. If the helmet
starts to come off, the helmet is too big
for you; select a smaller size.
4. Bend your head forward as far as pos-
sible. The chin guard must not touch your
chest.
5. Bend your head backwards as far as
possible. The helmet shell must not touch
your back.
Never wrap your hair inside the
helmet, or place anything in or on your
hair inside the helmet. Never insert
padding to modify the position of the
helmet on the head.
If you have any questions about properly
Manuel Ridill.indd 5
See figure B.
from beneath
See figure C.
See figure D.
C
sizing your helmet, see your retailer for
assistance.
Each of these tests must be repeated
throughout the life of the helmet, as the
the chin comfort padding may wear or change
over time. If, during the life of your
helmet, your helmet does not maintain
the correct fit, you must replace the
helmet.
WARNING! Never lend your helmet
to others without insuring a proper
fit in accordance with these instructions.
WARNING! If you cannot obtain
a proper fit in accordance with
these instructions, DO NOT USE THE
HELMET. Select a different helmet size or
model.
Sizing (cm)
XS
S
A HELMET IN YOUR SIZE
M 57/58
53/54 L 59/60
55/56 XL
D
61
5
31/08/2016 15:41