Printer Connection; Interface Cable - Star TSP200 Guide D'utilisation

Please prepare the following before making connections to the printer. Always
have the power switch in the off position when making any connections.

• Interface cable

• Ferrite core (EU only)
3-1. Interface Cable

3. PRINTER CONNECTION

– 3 –
1 Open the cover
2 Push the head up lever (green) to the
rear.
Caution
If the printer is to be shipped, or if it
is to be stored for an extended period
of time, always pull the head up lever
forward so that the printer head is in
the up position. This will protect the
thermal head and prevent deforma-
tion of the platen.
3 Close the cover.