Tineco FLOOR ONE S6 Serie Mode D'emploi page 22

Brush Roller
Remove the brush roller by grabbing the brush
roller tab and pulling out.
Remove hair and debris from the brush roller
chamber and the opening with the cleaning tool.
Note:
• A spare brush roller is provided with your appliance for convenient replacement.
• To maintain optimal performance, replace the brush roller every 8 months.
Using the cleaning tool, remove the hair and
debris wrapped around the roller and rinse with
water. Replace the brush roller back into the
accessory holder, and allow it to dry completely
before reinstalling.
Replace the brush roller by inserting its end into
the left side of the holder, then attach the roller
tab to the magnetic buckle on the right side to
lock into place.
20