ISE SY-7005-1 Manuel D'utilisation page 22

Note: Lnclined insertion is more convenient
nuts
Adjustment Knob
7
Step.5:
Slide the Seat (4) onto the post
on top of the Seat Carriage (6).
Make sure that the Seat (4) is
pointing straight forward and
that the top of the Seat is level.
Then, tighten the two nuts (only
one nut is shown) beneath the
Seat.
Step.6:
Loosen the indicated Adjust-
ment
Knob and pull it outward.
Next,
insert the Handlebar Post (8)
into the Main Body (1). Move
the Handlebar Post upward
or down- ward to the desired
position,and release the
Adjustment Knob into a hole
in the Handlebar Post.
Make sure that the Adjust-
ment Knob (19) is engaged
in a hole in the Handlebar
Post. Then, tighten the Ad-
justment Knob.
EN