Publicité
Les langues disponibles
Les langues disponibles
Introduction
MANUFACTURER:
Woodster GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
we hope your new tool brings you much enjoyment and
success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
WE RECOMMEND:
Read through the complete text in the operating
instructions before installing and commissioning the
device.
The operating instructions are intended to help the
user to become familiar with the machine and take
advantage of its application possibilities in accord-
ance with the recommendations..
The operating instructions contain important in-
formation on how to operate the machine safely,
professionally and economically, how to avoid
danger, costly repairs, reduce downtimes and how to
increase reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in
your country.
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruc-
tion manual each time before operating the machine
and carefully follow its information. The machine can
only be operated by persons who were instructed
concerning the operation of the machine and who are
informed about the associated dangers. The mini-
mum age requirement must be complied with.
In addition to the safety requirements in these oper-
ating instructions and your country's applicable regu-
lations, you should observe the generally recognized
technical rules concerning the operation of identical
constructed machines.
We accept no liability for accidents or damage that oc-
cur due to a failure to observe this manual and
the safety instructions.
Device Description (Fig 1-2)
1.
Handle
2.
Engine brake lever
3.
Throttle lever
4.
Lower push bar
5.
Wing nut with screw M8 x 40 mm (2x)
6.
Grass basket
7.
Discharge flap
8.
Belt cover
9.
Wheels
10. Oil dipstick
11. working height adjustment
12. Fuel tank with cover
13. Air filter cover
14. starter cable
A
cable clips (2x)
B
starter cable holder (1x)
C
Spark plug wrench (1x)
D
Bag for spark plug wrench (1x)
E
Hexagon bolts M8 x 16 mm with ratchet nuts (4x)
Unpacking
• Open the packaging and remove the device carefully.
• Remove the packaging material as well as the pack-
aging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage.
• If possible, store the packaging until the warranty pe-
riod has expired.
m ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swal-
lowing and suffocation!
Intended use
The equipment can be used as a scarifier.
The scarifying roller is designed for ripping moss and
weeds - complete with their roots - out of the soil and
for loosening the soil. As a result your lawn can absorb
nutrients better and is cleaned. We recommend you
to scarify your lawn in the spring (April) and autumn
(October).
The equipment is intended for private use i.e. for
use in home and gardening environments.
Scarifiers for private use are machines whose annu-
al operating time generally does not exceed 10 hours,
during which the machine is primarily used to maintain
small-scale, residential lawns and home/hobby gar-
dens.
GB
15
Publicité
