Progress PVS1551 Notice D'utilisation page 9

The indicators:
indicator still flashes.
The indicator shows the current
setting. If on = the acoustic signal is
active. If off = the acoustic signal is
disabled.
2. Press to change the setting.
3. Press on/off to confirm and save the
setting.
AirDry
AirDry improves the drying results with
less energy consumption.
During the drying phase, the
door opens automatically and
remains ajar.
OPTIONS
Desired options must be
activated every time before you
start a programme.
It is not possible to activate or
deactivate options while a
programme is running.
Not all options are compatible
with each other. If you select
non compatible options, the
appliance automatically
deactivates one or more of
them. Only the indicators of the
still active options are on.
and are off. The
CAUTION! Do not try to close
the appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
AirDry is automatically activated with all
programmes excluding
To improve the drying performance refer
to the XtraDry option or activate AirDry.
CAUTION! If children have
access to the appliance, it is
advised to deactivate AirDry as
opening the door may pose a
danger.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press .
The indicators:
indicator still flashes.
The indicator indicates the current
setting. If on = AirDry is on, if off = AirDry
is off.
2. Press to change the setting.
3. Press on/off to confirm and save the
setting.
XtraDry
Activate this option to boost the drying
performance. With XtraDry on, the
duration of some programmes, water
consumption and the last rinse
temperature can be affected.
XtraDry is a permanent option for all
programmes other than
not to be selected at every cycle.
In the other programmes the setting of
XtraDry is permanent and it is
automatically used in next cycles. This
configuration can be changed at any time.
Progress 9
.
and are off. The
and need