Télécharger Imprimer la page

Breville the Barista Express BES870XL/A Manuel D'instructions page 24

Publicité

Les langues disponibles

Les langues disponibles

Care & Cleaning
REPLACING THE WATER FILTER
1
2
Soak water filter for 5 mins
Rinse water filter & mesh
The provided water filter helps prevent
scale build-up in and on many of the inner
functioning components. Replacing the water
filter every two months will reduce the need to
descale the machine.
If you live in a hard water area, we recommend
you change the water filter more frequently.
• Remove the new water filter from the
plastic bag.
• Soak the new water filter in a cup of water
for 5 minutes, then rinse under cold running
water.
• Wash the water filter holder with cold water,
taking specific care to rinse the stainless steel
mesh.
• Insert the new water filter into the two parts
of the water filter holder.
• Set Date Dial 2 months ahead.
• To install the assembled water filter holder
into the water tank, align the base of the water
filter holder with the adapter inside the water
tank. Push down to lock into place.
• Slide the water tank back into position at the
back of the machine, ensuring to push down
completely to lock into place.
The water filter should be removed if using
filtered or bottled water.
24
3
4
REPLACEMENT DUE
Place filter into filter holder
Set date 2 months ahead
To purchase water filters contact Breville
Consumer Support.
CLEANING CYCLE
The CLEAN / DESCALE light will illuminate
(flashing) when a cleaning cycle is required.
This is a back-flushing cycle and is separate
from descaling.
1. Insert the 1 CUP filter basket into the
2. Lock the portafilter into the group head
3. Ensure the water tank is filled with cold
4. Press the POWER button to switch the
5. Press the 1 CUP and 2 CUP buttons
6. The cleaning cycle will commence and last
5
Install filter in water tank
NOTE
portafilter, followed by the supplied
cleaning disc, followed by
1 cleaning tablet.
and place a large container beneath the
portafilter spouts.
water and the drip tray is empty.
machine off.
simultaneously, then also press the
POWER button. Hold all 3 buttons together
for approximately 10 seconds.
for approximately 5 minutes. During this
time, water will intermittently flow from the
portafilter spouts. Once complete, 3 beeps
will sound.
6
Insert & lock water tank

Publicité

loading