ELECTRODES ADJUSTMENT
An ignition electrode and a control electrode are fitted on EM 9/2-E burner. On remaining burner models there are two ignition
electrodes and a control electrode. They should be positioned according to the indications supplied in the figure below.
IMPORTANT: the ignition electrodes and the control electrode must never touch the diffuser, the draught tube or other
metallic parts. If this were to happen they would no longer work, thus impairing operation of the burner itself.
The position of the electrodes should always be checked after any work on the combustion head.
EM 9/2-E
EM 16/2-E
Control electrode
EM 26/2-E
Control electrode
- 34
-