Kenwood KCC90 Serie Instructions page 8

display screen symbols explained
5720000723 Iss 2 KCC90 Eng_Fre_Ger_Ital_Sp.A4..indd 8
Hot warning indicator
Below 40°C - no red bar
40°C-60°C - flashing red bar
Above 60°C - solid red bar
Shows when mixer is being operated in high speed high temperature mode (HSHT).
Shows current phase of a programme when using the pre-set programmes.
Text display shows status information, programme information and error messages.
Shows the selected temperature.
Temperature can be set from, "OFF", 20°C - 180°C.
Shows the time selected in hours, minutes and seconds.
Time can be set from 5 seconds  8 hours and will count down once a temperature
has been selected.
Shows the stir setting selected, ranging from 0  9.
• The outer bars will progressively light up to indicate the length of time before the next
stirring action.
• The inner stir arrow will start flashing 3 seconds before the next stirring action.
• At the start of a stirring action, there may be a brief boost in speed in order to
separate pieces of food.
Shows the power setting selected.
Power settings range from Auto, 1  7.
8
23/11/2016 09:07