Installation Procedure - Toto FLT141 Manuel D'installation Et D'utilisation

• Remove the template from the
countertop.
• Temporarily set the lavatory on the
counter top to check for fit.
• Remove the lavatory and install the
faucet and drain fittings (not included)
per manufacturer's instructions.
• Insert threaded rods into the mounting
holes at the bottom of the lavatory.
• Apply a continuous bead of sealant (not
included) on the bottom of the lavatory.
• Place the lavatory onto the countertop
while carefully aligning the threaded
rods with the holes in the countertop.
FLT132
FLT141
• Place the washers onto the threaded rods and install the wing nuts.
• Tighten all wing nuts until the lavatory is firmly held in position.
• DO NOT OVERTIGHTEN. Overtightening may damage the products
and cause personal injury and/or property damage.
• Wipe away any excess sealant (caulk).
FLT132
FLT141
LLT150
LLT151

INSTALLATION PROCEDURE

Sealant
Threaded rod
LLT150
LLT151
Lavatory
Threaded Rod
Washer
Wing Nut
3
Counter Top